Multicast compact

Multicast® and Motorcast compact represent two entirely new developments of melting and casting machines which are suitable for melting all precious metal and CoCr alloys.

The new concept of the AcCon®-system which is based on the approved principle of centrifugal casting sets a new standard. The precisely adjustable counterweight ensures low-vibration running for all commercial casting ring systems as well as for casting moulds without rings.
The modular design of the Multicast® compact allows the melting with an electric melting device as well as with the open flame. For this purpose the machine can be easily retrofitted with a special centrifugal arm. The microprocessor ensures exact control of the temperature in the melting furnace. The motor power is controlled electronically.
The simple programming and preselection of nine different casting programs allow to obtain constant casting results even if the unit is to be operated by different persons. Casting protocols can be prepared and data can be documented if the Multicast Printer is connected to the machine. If a reduction of the machine height is required, e.g. due to a low system of shelves, the control element can be shifted to the left side of the machine with the help of a conversion kit or the Multicast Printer.

AcCon means:

electronically-controlled starting

controlled starting acceleration

optimized geometry of the centrifugal arm and distribution of weight

controlled pivoting movements of the centrifugal arm

preselectable final speed

The AcCon®-system allows:

quick filling of the casting mold

reliable filling of very fine structures

homogeneous casting structure due to high densification

maximum casting safety allows to obtain bio-compatible castings

use of all investment compounds

very smooth running

Good reasons for the Multicast® compact:

saving of space due to very small size

can be used for all precious metal

suitable for all investment compounds

simple operation due to nine preselectable casting programs

quality assurance in your dental laboratory due to reproduceable casting results and the possibility of documentation

exact temperature control with a microprocessor

no overheating of the melt and - due to that - minimum risk of mis-casts

microprocessor control for careful heating and long service life of the furnace

the advantages of the AcCon®-system

Casting parameters such as the alloy type, alloy quantity, batch, casting temperature and final speed can be documented in the casting protocol. Additionally, the name of the laboratory, date and time are entered in the protocol.